Ball Joints

Ball Joint Lower

Ball Joint - Greasable - Lower - Screw-In - 1.83 in Body at Thread - Larger Stud - Hardware Included - Each

Extended Upper Ball Join t

Ball Joint - Greasable - Upper - Bolt-In - 0.5 in Extended Length - Hardware Included - GM A-Body / F-Body / X-Body 1964-74 - Each

Upper Ball Joint GM Mid Size 4-Bolt

Ball Joint - Take-A-Part - Greasable - Upper - Front - Bolt-In - 2.000 in/ft Taper - 4.593 in Stud - 1 in Extended Length - 1/2-20 in Thread - Hardware Included - Steel - GM 1970-2004 - Each

Upper Ball Joint +1.00 Screw-In

Ball Joint - Take-A-Part - Greasable - Upper - Screw-In - Low Friction - 1.500 in/ft Taper - 4.542 in Stud - 1 in Extended Length - 1/2-20 in Thread - Hardware Included - Each

Upper Ball Joint +1.00 GM Large 4-Bolt

Ball Joint - Take-A-Part - Greasable - Upper - Bolt-In - Low Friction - 1.500 in/ft Taper - 4.542 in Stud - 1 in Extended Length - 1/2-20 in Thread - Hardware Included - Mustang II / Pinto - Each

Ball Joint Hybrid Press- In 1210-108 / 1210-102

Ball Joint - Take-A-Part - Greasable - Rebuildable - Lower - Front - Press-In - 1.500 in/ft Taper - 3.848 in Stud - 5/8-18 in Thread - Hardware Included - Steel - Zinc Oxide - GM B-Body 1971-76 - Each

Lower Ball Joint +.500 Large Screw-In

Ball Joint - Take-A-Part - Greasable - Lower - Screw-In - 1.500 in/ft Taper - 4.643 in Stud - 0.5 in Extended Length - 5/8-18 in Thread - Hardware Included - Each

Lower Ball Joint +.500 GM Large Screw-In

Ball Joint - Take-A-Part - Greasable - Lower - Screw-In - 2.000 in/ft Taper - 4.348 in Stud - 0.5 in Extended Length - 5/8-18 in Thread - Hardware Included - Each

Lower Ball Joint +.500 GM Mid-Size Press-In

Ball Joint - Greasable - Lower - Press-In - 2.000 in/ft Taper - 4.141 in Stud - 1/2-20 in Thread - Hardware Included - Each

Upper Ball Joint +.500 GM Mid Size

Ball Joint - Take-A-Part - Greasable - Upper - Bolt-In - Low Friction - 2.000 in/ft Taper - 4.093 in Stud - 1/2-20 in Thread - Hardware Included - Each

Upper Ball Joint - GM Large +.500

Ball Joint - Take-A-Part - Greasable - Upper - Bolt-In - Low Friction - 2.000 in/ft Taper - 4.35 in Stud - 1/2-20 in Thread - Hardware Included - Each

Upper Ball Joint +.500 Screw-In

Ball Joint - Take-A-Part - Greasable - Upper - Screw-In - Low Friction - 1.500 in/ft Taper - 4.042 in Stud - 0.5 in Extended Length - 1/2-20 in Thread - Hardware Included - Each